Install bathroom tub spout

Not all spouts are the same. Some are threaded where they meet the wall; others have threads deep inside. You may be able to replace the pipe coming out of the wall or purchase a retrofit kit. Use groove-joint pliers or a pipe wrench to remove an old spout that is threaded on. Clean the end of the pipe and scrape away any caulk on the wall. Wrap the pipe threads clockwise with two or three turns of pipe-thread tape. Several types and styles of spouts are available; be sure to select one that complements the design of your shower system.

For example, if you control the shower with a diverter knob, buy a spout with a diverter. If, on the other hand, the diverter is not part of your shower control, buy a spout without a diverter. Scrape off old caulk. If there was a gap between the old spout and the wall, the new spout will eliminate it. Insert a large screwdriver or the handle of a wood hammer into spout, using the tool as a lever to rotate the spout in a counterclockwise direction.

By contrast, for showers, the faucet should be at least 48 inches from the floor not just the basin of the bath. The shower head should be even higher, at a height of at least 72 to 80 inches above the floor. If you need to adjust the height, the shower head can be roughed-in at either a lower or higher position, as long as it fits with the rest of your aesthetic and plumbing arrangement.

One of the most difficult things about figuring out how high above the tub a spout should be is that the size of the spout and the tub are, of course, variable. Just as important, if not more so, is allowing enough room for the overhang of the spout over the basin of the tub. On the other hand, if it protrudes too far out, it can be obtrusive and rub up against or poke you in the back.

All of this contributes to the ultimate height of the spout above the tub. This can get worse at higher rates of flow. Finally, make sure that the valve, shower head, and spout are all centered. The last thing you want is to have them off to the side and create backsplash that way. Before we tackle this, however, it is worth asking — just what is a tub filler in the first place?

For the uninitiated, a tub filler is the name for a larger faucet that is specifically designed to help fill up your tub as fast as possible. Tub fillers can help with that immensely. Bestseller No. Do not use this tub spout on Copper Pipes. To ensure a leakproof connection, remove any residue from the pipe and apply Teflon tape before connecting this tub spout. Whether you're remodeling your bathroom or just replacing a leaky spout, this tub spout replacement is the quick and easy way to upgrade your faucet.

This replacement spout also resists discoloration, so it will retain its polished chrome color for years.

Noise reduction. The chrome finish can effectively resist scratches in daily use. You can put your phone above the spout and watch a film in the bathtub. And different styles of bathtubs, it adds a modern touch to any bathroom.